Club Repeaters and IRLP/EchoLink
MRARC currently operates the following repeaters:
-
VE7RMR 2m VHF: 146.800-MHz (tone 156.7) IRLP node 1910, Echolink node 51910, Autopatch
15W into a Sinclair SD224; gain=9dB; ERP=70W; eliptical pattern w/ null to North
-
VE7RMR 1.25m VHF: 224.880-MHz
40W into a Comet CA-super-22; gain=6.6dB; ERP=110W; omni pattern
-
VE7RMR 70cm UHF: 443.625+MHz (tone 156.7) IRLP node 1849, Echolink node 44463
12W into a AEA Isopole; gain=7dB; ERP=35W; omni pattern
All repeaters are open for all to use.
Using IRLP
For connecting numbers look-up in Active Node Status at the bottom of the IRLP homepage
Instructions for the Use of the IRLP System
Please Note:
1) Please give your “Call Sign” before entering Node ID wanting to call to.
2) Allow a 2 second pause before answering to someone during a conversation.
3) When finished, do NOT forget to bring down the station or reflector.
4) Sign off by giving your“Call Sign” and calling off.
Our node ID number: 1910
To close the link: 73
To get the correct time enter: 400
To get info on last incoming and/or outgoing call enter: * 69
Echo reflector (for checking your audio) On: 9990, Off: 73
Here’s the info for IRLP and Echolink operation.
This is for use on the 146.800, VE7RMR repeater.
IRLP
To make a call on IRLP first determine which node you want to call. The worldwide node list is at:
Go to “Node Info” then “List of nodes and Frequencies”
Example:
To call node 1050 in Vernon…key your mike and press “A1050″. Node number must be preceded with “A”. To disconnect the call press “73″. The requirement for “A” only applies to our repeater.
If you were in Vernon and wanted to call Maple Ridge (1910) you would select one of the IRLP repeaters in Vernon and press “1910″. ..without the ”A”.
For fun, if you want to call a node at random anywhere in the world press “A777″
ECHOLINK
Echolink is on a different VoIP system with a separate list of node numbers. Find them at:
The same method is used for calling Echolink nodes except of adding “A * “.
Example: to call node 287151 in Calgary, press “A*287151″
“73″ to disconnect.
Marty [VE7XX]
